A pair of flexible tap connectors with 10mm into body thread

A pair of flexible tap connectors with 12mm into body thread

Extra long flexitail tap connectors (450mm long x ½"F), sold in pairs

Ultra long flexible tap connectors (600mm x 1/2"F), sold in pairs

A pair of 900mm long hose tap tails (900mm x 1/2"F) - Extra Long

A pair of 2 part flexible tap tails - easier to fit!

A pair of flexible connectors with 3/8" female connection

A pair of brass tap tail adaptors - 1/2" BSP to 15mm 

A pair of 10mm flexible tap connectors with 15mm end compression fittings

A pair of 12mm flexible tap connectors with 15mm end compression fittings

An extra short replacement hose suitable for taps with pull out spray heads - 60cm long

A special replacement hose suitable for taps with pull out spray heads

A replacement nylon pull out hose with ½"F connections at each end

A special replacement hose suitable for taps with pull out spray heads -1.5 metres length

A special replacement hose suitable for taps with pull out spray heads -1.2 metres long

A hose for pull out kitchen taps with 12mm male thread x 1/2" BSP 

A black nylon hose for hairdresser/barber taps with 3/8" F connection x 15mm M connection

A 10mm diameter rigid tap tail with 10mm thread to screw into monbloc taps

Pairs of copper tap tails with 10mm threads x 15mm diameter

Pairs of copper tap tails with 8mm threads x 15mm diameter

Standard Flexible Tap Connector - 3/4" female  to 15mm Compression

Standard Flexible Tap Connector - 1/2" to 15mm Compression - 30cm or 50cm lengths

Flexible Tap Connector (1/2" female  to 15mm Compression) - With shut off isolating valve

WRAS approved  Flexible Tap Connector - 1/2" to 15mm compression or 3/4" to 15mm compression

WRAS approved  Flexible Tap Connector (1/2" or 3/4" to 15mm compression) - With Isolating Valve

A WRAS approved 30cm long tap connector with non taint polyethylene liner - 1/2" x 15mm compression

A pair of WRAS approved inlet tap connectors with non taint polyethylene liner - 8mm connection

A pair of WRAS approved inlet tap connectors with non taint polyethylene liner - 8mm connection x 30cm length

A pair of WRAS approved inlet connectors with non taint polyethylene liner - 10mm connection

A WRAS approved pair of 10mm inlet connectors with non taint polyethylene liner - 70cm long

Speciality Short Water Outlet Connector Hose - 1/2"F x 1/2"F  (15cm Length)

Speciality Water Outlet Connector Hose - 1/2"F x 1/2"F  (100cm)

Speciality Water Outlet Connector Hose - 1/2"F x 3/4"M (100cm)

Speciality Water Outlet Connector Hose - 1/2"M x 1/2"F  (100cm)

Speciality Water Outlet Connector Hose - 1/2"M x 3/4"F (80cm)

Speciality Water Outlet Connector Hose - 1/2"M x 3/8"F (80cm)

Speciality Water Outlet Connector Hose - 1/2"F x 3/4"F (100cm)