Kitchen Tap Spares - Replacement Handsets & Pull Out Hoses 

Replacement handset suitable for pull out spray kitchen taps - 2 spray patterns

A universal fitting 'bell design' kitchen spray handset - 2 spray patterns

A universal fitting replacement spray handset with 2 spray patterns

A universal fitting replacement rinse spray head for kitchen taps  - 2 spray patterns

A professional standard pre rinse handset by Monolith - for commercial use taps

An extra short replacement hose suitable for taps with pull out spray heads - 60cm long

A special replacement hose suitable for taps with pull out spray heads

A special replacement hose suitable for taps with pull out spray heads -1.5 metres length

A special replacement hose suitable for taps with pull out spray heads -1.2 metres long

A hose for pull out kitchen taps with 12mm male thread x 1/2" BSP 

A hose for pull out kitchen taps with 2 male connections (10mm & 12mm)

A rigid plastic under sink support that helps stop stainless sinks flexing 

A replacement weight that fits on pull out hose sink taps

A simple to fit support that helps stop stainless sinks flexing

BSP plumbing 0-rings available in 6 sizes (3/8" to 1.5")

Rubber O-Rings for sink tap spouts - Set of 2

A chrome plated wall elbow with 15mm x 1/2" Female BSP connection - For mounting Bib taps

A pair of chrome stands for deck mounting bib kitchen taps

An extension piece to lengthen 1/2" BSP tap tails by 37mm (sold singly)